The Solution to the CAN-BUS HID Problem is Here!

Many vehicles produced in the last 10 years make use of a CAN-BUS system, which has safety features that can interfere with a common HID kit. The good news is that our new CAN-BUS HID Conversion Kit eliminates any "Bulb Out" or flickering issues. In addition any possible radio interference will be eliminated.

Convert your dim factory bulbs to the most intense - vibrant HID lights on the market. Don't put your families safety in the hands of a fly-by-night merchant, purchase your xenon hid conversion kit from us today and start driving safer.

What is the CAN-BUS Problem? How to Solve it...

Our CAN-BUS Ballast gets rid of the flickering issues or headlamp error light issue. This issue is known on most European cars (BMW/BENZ/AUDI/VW) and now it is occur on some American cars (CHRYSLER/DODGE/JEEP). All vehicles halogen bulb being 55W and HID being 35W. Therefore, when an HID kit is installed into the vehicle, the car ECU detects the lights are running at 35W instead of the normal 55W. Two things will happen, when it detect this.

1. When running at 35W, the ECU thinks the light bulb on one side is broken and cut down on the power it sends to the headlight, causing the HID to flicker because there is not enough power.
2. It will cause a headlight error light on the dash because it think 1 side of the headlight is broken.

This CAN-BUS will trick the ECU into thinking the HID is running at 55W, when it is really running at 35W. This will trick the ECU into thinking that both side of the headlights are working fine and will allow the ECU to give the headlights full power to run properly, which will get rid of the flickering issue and error light issue. This Ballast is safe and will not damage any ECU or electrical wiring.

Features:

• True Plug-N-Play Conversion Kit
• Safe for headlight and fog light, won't melt the housing, runs cooler than stock halogen bulbs
• Brighter driving vision at night
• 3 times brighter than halogen bulbs
• Fits into existing headlights or fog lights, no modification or retrofitting required
• Nice color output
• 35W power consumption compare to 55W halogen bulbs
• Bulb Lifespan of 3 to 5 years
• Ballast has shut off mode, to prevent a fire or damages if a glitch occurred.
• Ballast and Bulbs is Waterproof and Shockproof
• Waterproof connectors and grommets

- Improve visibility by up to 300% Our bulbs are up to 3 times brighter than any halogen bulb on the market today.

- Our bulbs last 10x longer than your standard healight bulbs With a lifespan of 3000 hours (or 3 - 5 years of average driving) you will save money and time you would normally spend on replacing your bulbs.

- Water & Shock Proof Ballast Our ballasts are built to last regardless of the weather conditions.

- Easy Installation Most kits can be setup in a matter of less than one hour. Installation is generally plug and play, rarely requiring mechanical modification or additional components.